TCM 2 747-(MCR) – Arconic Fastening Systems & Rings – Portet sur Garonne (FR) PQ440 Sub-contractor change for silv

QAR: Click Here
Conditions for approval required by: Philip Edwards

2 Replies to “TCM 2 747-(MCR) – Arconic Fastening Systems & Rings – Portet sur Garonne (FR) PQ440 Sub-contractor change for silv”

Philip Edwards says:

19/11/2019 at 9:45 am

NADCAP Cert for NDT out of date

Silver plating check 3 samples need to be tested only 1 seems to have been done.

Hardness is in HV, spec requires HRC are these values ok

Reply
1. Quentin BRETON says:
  
  16/03/2020 at 10:44 am
  
  Good Morning Phil,
  
  Sorry for the late answers.
  
  – NADCAP & EN9100 certificate have been updated and will be provided to Antoine DIAZ.
  
  – Silver plating check, as per Aeroprotec certificate sampling plan follows their internal specification IQ6-0-0, for less than 501 parts, 5 parts are inspected.
  
  – On our test report only Vickers measurements appeared, now the conversion to HRC is mentioned. 304/333HV –> 31.2/34.7 HRC, compliant to EN2576 (26/35HRC).
  
  All updated documentation will be provided to Antoine DIAZ.
  
  Have a nice day.
  
  Best regards,
  
  Quentin
  
  Reply