TCM 1 1612-(R) – Howmet Fixations Simmonds – St Cosme en Vairais (FR) PQ401

3 Replies to “TCM 1 1612-(R) – Howmet Fixations Simmonds – St Cosme en Vairais (FR) PQ401”

1. In « Particular remarks » section, it is written :
   “Some brief comments regarding Test Rapport TR16310884, rev 1.
   The Sample size in this TR is complained with the ISO5858:1999 specification, Table 12 (Production Lot Quantity 2214, gives a sample size of 125 peaces). The ISO5858 doesn’t required NDT in acceptance test, it is only in qualification.”
   In Test Report TR16310884, rev 1, I cannot see any sample size for FP inspection.
   Even though ISO5858 does not require any NDT for Acceptance, could you please clarify? I assume that NDT data is available in nut test report (#15288840) and maybe in basket test report (#15288842).

   Many thanks in advance
   Best regards Julien

   Reply

   1. Mr. Gauther,

      NDT was performed on the nut ( lot 15288840) see record on the power point file . No NDT on the basket .

      Nadege/Genevieve

      Reply

2. Dear Mrs. Richard,
   Many thanks for these evidences.
   Approved from my side.
   Best regards
   Julien

   Reply